Nokia Bluetooth Headset BH-202
1
4
5
2
7
3
6
8
9
9251775/1
ENGLISH
Unauthorized changes or modifications to
this device may void the user's authority to
operate the equipment.
technology or software subject to export
laws and regulations from the US and other
countries. Diversion contrary to law is
prohibited.
Export Controls
This device may contain commodities,
Introduction
The Nokia Bluetooth Headset BH-202 without cables. A Bluetooth
allows you to make and receive calls
while on the move. You can use the
connection does not require that the
phone and the headset be in line of
headset with compatible phones that sight, but both devices should be
support Bluetooth wireless
technology.
within 10 meters (30 feet) of each
other. Connections may be subject to
interference from obstructions, such
as walls, or other electronic devices.
Read this user guide carefully before
using the headset. Also read the user
guide for your phone, which provides The headset complies with the
important safety and maintenance Bluetooth Specification 2.0 + EDR
information. Keep the headset out of that supports the Headset Profile 1.0
reach of small children.
and Handsfree Profile 1.5. Check with
the manufacturers of other devices to
determine their compatibility with
this device.
Bluetooth wireless technology
Bluetooth wireless technology allows
you to connect compatible devices
ENGLISH
There may be restrictions on using
Bluetooth technology in some
locations. Check with your local
authorities or service provider.
Get started
headset is intended for use with the
AC-3, AC-4, and DC-4 chargers.
The headset contains the following
parts shown on the title page: green
indicator light (1), multifunction key
(2), charger connector (3), microphone
(4), volume keys (5), and earloop (6).
Warning: Use only chargers
approved by Nokia for use
with this particular
enhancement. The use of any other types
may invalidate any approval or warranty
and may be dangerous.
Before using the headset, you must
charge the battery and pair the
headset with a compatible phone.
For availability of approved
Note: Parts of the headset are
magnetic. Metallic materials
may be attracted to the
enhancements, please check with your
dealer. When you disconnect the power
cord of any enhancement, grasp and pull
the plug, not the cord.
headset. Do not place credit cards or
other magnetic storage media near the
headset, because information stored on
them may be erased.
Charge the battery
The headset has an internal,
nonremovable, rechargeable battery.
Do not attempt to remove the battery
Chargers
Check the model number of any charger
before using it with this device. The
ENGLISH
from the device, as you may damage
the device.
devices, usage settings, usage styles,
and environments.
1. Connect the charger to a wall
outlet.
When battery power is low, the
indicator light flashes quickly.
2. Connect the charger cable to the
headset (7). The indicator light is
on while charging. It may take a
while before charging starts. If
charging does not start, disconnect
the charger, plug it in again, and
retry. Charging the battery fully
may take up to 2 hours 30 minutes.
Switch the headset on or off
To switch on, press and hold the
multifunction key until the indicator
light is displayed.
To switch off, press and hold the
multifunction key until the indicator
light briefly flashes several times and
turns off.
3. When the battery is fully charged,
the indicator light turns off.
Disconnect the charger from the
headset and the wall outlet.
Pair the headset
1. Ensure that your phone is switched
on and that the headset is
switched off.
The fully charged battery has power
for up to 10 hours of talk-time or up to
200 hours of standby time. However,
the talk and standby times may vary
when used with different mobile
2. Press and hold the multifunction
key (for about 8 seconds) until the
indicator light is continuously
displayed.
phones or other compatible Bluetooth
ENGLISH
3. Activate the Bluetooth feature on
the phone, and set the phone to
search for Bluetooth devices.
separately after pairing. You only
need to pair the headset with your
phone once.
4. Select the headset from the list of If the pairing is successful, the
found devices.
indicator light briefly flashes five
times, and the headset appears in the
phone menu where you can view the
currently paired Bluetooth devices.
5. Enter the passcode 0000 to pair
and connect the headset to your
phone. In some phones you may
need to make the connection
The headset is now ready for use.
Basic use
If your phone supports last number
redialing with the headset, press and
hold the multifunction key (when no
call is in progress) until you hear a
beep.
Wear the headset
Slide the earloop behind your ear, and
point the headset toward your mouth.
To use the headset on the left ear,
gently flip (8) and rotate the earloop
(9).
If your phone supports voice dialing
with the headset, briefly press the
multifunction key when no call in
progress, and proceed as described in
the user guide of your phone.
Call handling
To make a call, use your phone in the
normal way when the headset is
connected to your phone.
ENGLISH
To answer or end a call, briefly press
the multifunction key. If you do not
want to answer the call, press and
hold the multifunction key.
To adjust the earphone volume, press
either volume key.
Battery information
Your device is powered by a rechargeable capacity and lifetime of the battery.
battery. The battery can be charged and Always try to keep the battery between
discharged hundreds of times, but it will 15°C and 25°C (59°F and 77°F). A device
eventually wear out. Recharge your
battery only with Nokia approved
chargers designated for this device.
with a hot or cold battery may not work
temporarily, even when the battery is
fully charged. Battery performance is
particularly limited in temperatures well
below freezing.
Unplug the charger from the electrical
plug and the device when not in use. Do
not leave a fully charged battery
connected to a charger, since
Do not dispose of batteries in a fire as
they may explode. Batteries may also
overcharging may shorten its lifetime. If explode if damaged. Dispose of batteries
left unused, a fully charged battery will
lose its charge over time.
according to local regulations. Please
recycle when possible. Do not dispose as
household waste.
Never use any charger that is damaged.
Leaving the device in hot or cold places,
such as in a closed car in summer or
winter conditions, will reduce the
ENGLISH
Care and maintenance
Your device is a product of superior
design and craftsmanship and should be
treated with care. The suggestions below
will help you protect your warranty
coverage.
batteries, and warp or melt certain
plastics.
•
Do not store the device in cold areas.
When the device returns to its normal
temperature, moisture can form
inside the device and damage
electronic circuit boards.
•
Keep all accessories and
enhancements out of the reach of
small children.
•
•
Do not attempt to open the device.
•
Keep the device dry. Precipitation,
humidity, and all types of liquids or
moisture can contain minerals that
will corrode electronic circuits. If your
device does get wet, allow it to dry
completely.
Do not drop, knock, or shake the
device. Rough handling can break
internal circuit boards and fine
mechanics.
•
•
Do not use harsh chemicals, cleaning
solvents, or strong detergents to
clean the device.
•
•
Do not use or store the device in
dusty, dirty areas. Its moving parts
and electronic components can be
damaged.
Do not paint the device. Paint can
clog the moving parts and prevent
proper operation.
Do not store the device in hot areas.
High temperatures can shorten the
life of electronic devices, damage
All of the above suggestions apply
equally to your device, battery, charger,
or any enhancement. If any device is not
ENGLISH
working properly, take it to the nearest
authorized service facility for service.
|